What happened?
The printer displaying the message: The printer is not UV calibrated, please connect the UV calibrator and run the procedure.
Error name: Printer is not UV calibrated
Error code: #10308
How to fix it?
When replacing the print display or A64 logic board, you must calibrate the UV LEDs using the calibrator. This error can also occur if the calibration process failed or was aborted. The calibration process is part of the replacement guide.
How to replace faulty parts
How to replace the print display (SL1)
How to replace the A64 board (SL1)
Log in to post a comment
No comments