EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

UI overview

This article is also available in following languages: 
CSDEESFRITPL

PrusaSlicer has a fairly simple user interface. The majority of the screen is dedicated to the 3D view, which is used to manipulate 3D models. The top toolbar (1,2) is used to add and remove objects. The left toolbar (4) has tools for manipulation with 3D models, such as the scale or rotate tool. The right panel is used mainly to select a print, filament and printer profile (6,7,8) and to choose whether or not to generate supports or brim.

The “Slice now” button (5) is used to generate G-code, which can then be exported to an SD card or sent directly to a printer. Some of the advanced functions are hidden by default, you can enable them later by switching to the Advanced or Expert mode (12).

  1. The Add button loads models into PrusaSlicer
  2. Delete and Delete All buttons remove the model(s) from PrusaSlicer
  3. Opens detailed settings of print, filament and printer
  4. Move, Scale, Rotate, Place on Face and Cut tools
  5. Slice and generate G-code button
  6. Quality / Speed setting of a print
  7. Material selection
  8. Printer selection
  9. Right-click on model opens a context menu
  10. Switch between 3D editor and layers preview
  11. Model preview
  12. Switch between Simple / Advanced / Expert mode
Was this article helpful?

Comments

Please sign in before adding a comment.
0
Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to info@prusa3d.com or through the button below.