EN
  • Čeština
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Touch screen (MK4, MK3.9, MK3.5, XL)

Menu
Relevant for:
Last updated 2 months ago
This article is also available in following languages: 
CSPLDEITFRJA

Starting from firmware 6.0.0, the Original Prusa printer can use touch to navigate the xLCD. Note that some functions will still need the knob, such as setting the target temperature manually or while moving with any of the axes.

Make sure you have the latest firmware installed.

Enabling the touch function

The touch feature needs to be manually enabled. For that, go into the printer menu to Settings -> User interface -> Touch.

Screenshot from the Original Prusa MK4

Touch Sig Workaround

If there is a lot of delay between touching the screen and the action you selected, or multiple touches generate just one action, activate the function Touch Sig Workaround under the Touch in Settings -> User interface.

Screenshot from the Original Prusa MK4

Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us