⬢Versions of the MK4 upgrade manual:
⬢07/2023 - Initial version 1.0
⬢10/2023 - Updated to version 1.01
EN
Login- Čeština
- Español
- Italiano
- Deutsch
- Polski
- Français
- 日本語
Manual changelog
Menu
- Original Prusa i3 MK3/MK3S/MK3S+ to MK4 upgrade
- 1. Introduction
- 1a. Parts check
- 1b. Printer disassembly
- 1c. Parts preparation
- 2. Frame assembly
- 3. X-axis & X-carriage assembly
- 4. Z-axis assembly
- 5. Nextruder assembly
- 6. xLCD assembly
- 7. Y-carriage & Heatbed assembly
- 8. Preflight check
- Manual changelog
- 1. Version history
- 2. Changes to the manual (1)
Manual changelog
Relevant for:
Last updated 7 months ago Difficulty
Very easy Steps
2 Available languages
⬢10/2023 - Silver PSU assembly
⬢The manual includes instructions for installing the silver PSU (Power Supply Unit).
⬢The MK4 upgrade manual has been separated from the MK4 kit assembly manual.
Manual version 1.01
Was this guide helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.