1. Rozpocznij montaż

Konserwacja drukarki

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L) [Tłumaczenie w toku]
  1. Rozpocznij montaż
  2. Tools necessary for this guide
  3. Printer preparation (part 1)
  4. Printer preparation (part 2)
  5. Removing the printer top cover
  6. Protecting the heatbed
  7. Accessing the hotend cables
  8. Disconnecting the hotend cables
  9. Removing the hotend assembly
  10. Silicone Sock Removal
  11. Thermistor Removal
  12. Thermistor Preparation
  13. Thermistor Installation
  14. Inserting the hotend
  15. Connecting the hotend cables
  16. Guiding the hotend cables
  17. Attaching the Printhead-cover-left
  18. Attaching the printer top cover
  19. Turning the printer on
  20. Final check