1. Tools necessary for this chapter

Montaż zestawu Prusa CORE One+

• 1. Introduction
• 2. Base assembly
• 3. Back assembly [Tłumaczenie w toku]
  1. Tools necessary for this chapter
  2. PSU assembly: parts preparation
  3. Preparing the PSU
  4. Power cables info
  5. Connecting the PSU
  6. xBuddy: parts preparation I.
  7. xBuddy: parts preparation II.
  8. Applying the thermal pads
  9. Installing the xBuddy
  10. Installing the xBuddy extension
  11. Installing zip ties
  12. Connecting the xBuddy extension board
  13. Inserting grommets: xBuddy box
  14. Wi-Fi: parts preparation
  15. Assembling the Wi-Fi
  16. Installing the Wi-Fi assembly
  17. Back panel: parts preparation
  18. Installing grommets: back panel top
  19. Installing grommets: sides + bottom
  20. Aligning the PSU
  21. Mounting the PSU
  22. Aligning the xBuddy box assembly
  23. Mounting the xBuddy box
  24. Power cables cover: parts preparation
  25. Connecting the power cables
  26. Preparing the PSU-cable-cover
  27. Covering the PSU cables
  28. Chamber fans: parts preparation
  29. Assembling the fan grid
  30. Attaching the fans
  31. Covering the cooling fans
  32. Rear profiles: parts preparation
  33. Installing the rear profiles
  34. Mounting the back panel
  35. Stepper splitter: parts preparation
  36. Guiding the Stepper splitter cable
  37. Connecting the Stepper splitter
  38. Mounting the Stepper Splitter
  39. LCD cable: parts preparation
  40. Guiding the LCD cable
  41. Main FE cable INFO
  42. Connecting the FE cable (no 3.)
  43. Guiding the FE cable (no. 2)
  44. Guiding the FE cable (no. 1)
  45. Guiding the FE cable (no. 4 and 5)
  46. FE cable - xBuddy: parts preparation
  47. Connecting the FE cable: xBuddy
  48. Plugging the xLCD cable
  49. PSU-cover: parts preparation
  50. Connecting the FE cable: PSU
  51. Czas na Haribo
  52. Gotowe
• 4. Heatbed assembly
• 5. CoreXY assembly
• 6. Nextruder assembly
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Calibration & First run
• Manual changelog