MK2/MK2S miniRAMBo electronics wiring
MK2 & MK2S electronics wiring isn't very complicated. But as it is done in tight space, it can be a bit challenging. If a certain electronic component does not respond. These are the common sources of the problem:
- It is not properly plugged into the miniRAMBo board.
- Some of the zip-ties might be overtightened. So look for any spots in which cables can be overstressed.
- Blown fuse. For more information check out the Blown Fuse (miniRAMBO).
Here is the complete electronics wiring overview:
Do not hesitate to contact us at firstname.lastname@example.org if you would have any further questions.