• English
  • Deutsch
  • Polski
  • Français

Modular bed error #17253 (XL)

Rilevante per:
Ultimo aggiornamento 4 months ago
Questo articolo è disponibile anche nelle seguenti lingue: 

What happened? 

The printer is showing the message "Heatbed tile no. #: Temperature measurement error; thermistor may be faulty". 

Error name: MB Maxtemp Err

Error code: #17253

The error message includes the number of the affected heatbed tile. The error might indicate an issue with the thermistor attached to the indicated heatbed tile. 

How to fix it? 

A visual inspection

Check that the indicated heatbed cable is correctly connected with the modular bed electronics, and with the heatbed tile, and reseat the connection. 

Check the heatbed tile for physical damage, for example, a scratch on any heatbed tile surface, or a cable in bad status on the bottom of a heatbed tile. 

Swap the cables

Swap the heatbed tile connection indicated on the error with another heatbed tile connector, and check if the indicated heatbed tile number in the error changes, or remains the same after the swap. 

If the error changes to another heatbed tile number after the cables swap, then the cable is causing the error. 

If the error is still the same as before, with the same error code, and on the same heatbed tile number after the swap, most likely the heatbed tile is causing the error. 

If your findings are different than these two cases, or in case of any doubts, do not hesitate to contact our customer support.
The heatbed tile thermistor is not available as a separate part: it comes together with the heatbed tile.

Questo articolo è stato utile?


Hai ancora delle domande?

Hai ancora delle domande?

Se hai una domanda su qualcosa che non è trattato qui, dai un'occhiata alle nostre risorse aggiuntive.
E se questo non dovesse funzionare, è possibile inviare una richiesta a [email protected] o tramite il pulsante qui sotto.