Firmware Update Required #26701 (MK4S) #13701 (MK4) #21701 (MK3.9) #23701 (MK3.5) #31701 (CORE One)

Rilevante per:

MK4 MK3.9 MK3.5 MK4S

Ultimo aggiornamento 8 days ago

Questo articolo è disponibile anche nelle seguenti lingue:

What happened?

The Original Prusa MK4/S, MK3.9, MK3.5, and CORE One are equipped with the xBuddy board. Thanks to this, and the capability for firmware to check for the connected components, the printer can detect a firmware installed for the wrong printer version.

If the printer recognizes a wrong firmware version installed, it shows the message "To continue, please insert the bundled USB flash drive and install the [Printer version] firmware", with the detected printer model shown in the message.

Error name: Different FW Required

Error code: #31701 (CORE One) #26701 (MK4S) #13701 (MK4) #21701 (MK3.9) #23701 (MK3.5)

How to fix it?

Download the firmware, and ensure the version matches your printer model.

Transfer the firmware file to your USB drive. Make sure to unmount the drive from your operating system before physically removing it. Then, follow the procedure for firmware flashing.

Are you still having issues? Contact our support team and let them know that you tried to fix the issue with these instructions. We will take it from there.

Questo articolo è stato utile?

Facile da capire

Ha risolto il mio problema

Altro motivo

Commenti

Hai ancora delle domande?

Se hai una domanda su qualcosa che non è trattato qui, dai un'occhiata alle nostre risorse aggiuntive.
E se questo non dovesse funzionare, è possibile inviare una richiesta a [email protected] o tramite il pulsante qui sotto.

Contattaci