English
1. Tools necessary for this chapter
Step 1 of 24 (Chapter 4 of 7)
Contents
Comments
⬢For this chapter, please prepare:
⬢T10 Torx key (screwdriver)
⬢1.5mm Allen key
⬢2.5mm Allen key
⬢Universal wrench
Loading...
Contents
Original Prusa XL Enclosure
- 1. Introduction
- 2. Enclosure assembly
- 3. Printer upgrade
- 4. Nextruder upgrade (Multi-Tool)
- Tools necessary for this chapter
- Nextruder cable bundle releasing
- Nextruder undocking
- Idler-swivel releasing
- PG case releasing: four screws
- PG case releasing: three screws
- Idler releasing
- Idler disassembly
- Nextruder idler: parts preparation
- Assembling the extruder idler
- Idler-swivel disassembly
- Idler-swivel disassembly
- Idler-swivel: parts preparation
- Assembling the Idler-swivel
- Assembling the Idler-nut
- Idler attaching: four screws
- Idler attaching: three screws
- Idler-swivel attaching
- Fan shroud removing
- Fan shroud: parts preparation
- Fan shroud securing
- Nextruder docking
- Nextruder connecting
- Good job
- 5. Nextruder upgrade (Single-Tool)
- 6. Enclosure secure
- Manual changelog XL Enclosure kit
Comments
Log in to post a comment
Balu
•
Do yourself a favor and do all extruders parallel, not one after the other.
Reply
NDG
•
This step took me 1 hour and 5 minutes with the 5-toolhead-version.
Reply
Klaus Krämer
•
For (dis-)assembly of the idler swivel you need a flat pliers or a 5,5mm wrench to turn the self impeding nuts. Fingers alone won't do ...
Reply