1. Tools necessary for this chapter

Original Prusa i3 MK2 to MK2.5S upgrade

• 1. Introduction
• 2. Disassembly
• 3. E-axis assembly
• 4. Heatbed assembly
  1. Tools necessary for this chapter
  2. Heatbed cable assembly (part 1)
  3. Heatbed cable assembly (part 2)
  4. Heatbed cable assembly (part 3)
  5. New heatbed cable cover design
  6. Preparing the heatbed (new design)
  7. Preparing the heatbed-cable-cover
  8. Mounting the heatbed-cable-cover
  9. Mounting the heatbed-cable-cover
  10. Proper cable management
  11. Wrapping the heatbed cables
  12. Securing the sleeve in place
  13. Finalizing the wrap
  14. Preparing the heatbed (old design)
  15. Preparing the heatbed-cable-cover
  16. Mounting the heatbed-cable-cover
  17. Proper cable management
  18. Wrapping the heatbed cables
  19. Securing the sleeve in place
  20. Finalizing the wrap
  21. Mounting the heatbed (part 1)
  22. Mounting the heatbed (part 2)
  23. Heatbed assembly is done!
• 5. Electronics
• 6. Preflight check
• Manual changelog MK2.5S