1. Tools necessary for this chapter

Original Prusa i3 MK3/MK3S/MK3S+ to MK4 upgrade

• 1. Introduction
• 1a. Parts check
• 1b. Printer disassembly
• 1c. Parts preparation
  1. Tools necessary for this chapter
  2. Removing the heatbed cable cover
  3. Removing the heatbed thermistor
  4. New heatbed thermistor: parts preparation
  5. Preparing the heatbed and thermistor
  6. Covering the thermistor
  7. Fixing the thermistor in place
  8. M3nEs nuts: parts preparation
  9. Inserting the M3nEs nuts
  10. Cable clips: parts preparation
  11. Installing the cable clips
  12. Installing the cable clips
  13. PG-front-case: parts preparation
  14. Assembling the PG-front-case
  15. Stickers and labels: parts preparation
  16. xLCD-cover MK4 sticker (optional)
  17. xLCD-cover MK4 sticker (optional)
  18. PG-case MK4 sticker (optional)
  19. PG-case MK4 sticker (optional)
  20. Sticking the serial number label
  21. Parts summary
  22. Don't throw away
  23. Still no sweets?
  24. That's it
• 2. Frame assembly
• 3. X-axis & X-carriage assembly
• 4. Z-axis assembly
• 5. Nextruder assembly
• 6. xLCD assembly
• 7. Y-carriage & Heatbed assembly
• 8. Preflight check
• Manual changelog