⬢Welcome to the guide for unboxing, calibrating, and setting up your Prusa CORE One. Follow these steps to ensure your printer is ready for its first print.
Although the Prusa CORE One comes pre-assembled, the LCD must be installed before printing, as it is removed for transport protection.
Do not install the LCD at this moment; wait for the appropriate instructions later in the guide.
We recommend keeping all the packaging material in case you decide to send the printer for service.
I am happy to tell the world, that my Core One is now assembled after 11 hours of work. There are some quirks in the instructions a couple of times, but the comment section helped a lot. Always check the comments. skip the complaints and focus on the very helpful advice you get from the great community.
First print done (no! not the Benchy) and it looks fine. now for the fine tuning....
There are some quirks in the instructions a couple of times, but the comment section helped a lot. Always check the comments. skip the complaints and focus on the very helpful advice you get from the great community.
First print done (no! not the Benchy) and it looks fine.
now for the fine tuning....