EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

1. Introduction

1. Introduction
Relevant for:
Last updated 3 months ago
1. Introduction
 Difficulty
Very easy
 Steps
12
 Available languages
CSPLDEESITFR
General information
General information
NOTE: The package is heavy! Always ask another person for help with handling.
We're recommending a bright light above your workbench. Some parts of the printer are dark and inadequate light could make the assembly process more difficult.
Tools in the package
Tools in the package
Tools in the package
Tools in the package
The package includes:
Some of the tools are intended primarily for regular printer maintenance. You won't need them for this manual. At the beginning of each assembly chapter is a list of the necessary tools.
Torx T10 screwdriver
2.5mm Allen key
3.0mm Allen key
Philips PH2 screwdriver
The printer's package contains a lubricant, which is intended for maintenance. No need to apply it during the assembly. There is a dedicated online manual Regular printer maintenance.
Labels guide
Labels guide
All the boxes and bags including parts for the build are labeled.
The amount of parts is written on the label. This number is included in the total number of each type of part.
Cheatsheet
Cheatsheet
Cheatsheet
Your package contains a letter, on the back of which is a Cheatsheet with drawings of all the necessary fasteners.
The frame covers are 1:1 scale, so you can compare the size by placing the frame cover on the paper to make sure you are using the correct type.
You can download it from our site prusa.io/cheatsheet-xl. Print it at 100 %, don't rescale it, otherwise, it won't work.
Front, left, right and rear side
Front, left, right and rear side
Front, left, right and rear side
Front, left, right and rear side
IMPORTANT: Due to the XL printer's large size, it is nearly impossible to capture the entire body in each photo. Throughout this manual, specific terms will be used to describe the side of the printer you will be working on:
Front side - here are two M3nE nuts inside extrusion and a place for future xLCD screen assembly.
Left side - can be recognized thanks to the safety sticker near its edge.
Right side - opposite to the left side, there is no safety sticker on this side.
Rear side - the remaining side, which will be used for the future PSU assembly, there is a trapezoidal printed part on each edge.
Transportation foam pads
Transportation foam pads
Transportation foam pads
Transportation foam pads
Never slide the bearing out of the rail, you may lose the bearing balls!
Each motor axis has transportation protective foam pads.
Take the foam pad off from both motors.
Take off the bottom green linear stopper from the rail.
Keep the upper green linear stoppers in the rail.
The green linear stopper will be used only during the assembly process. Once the printer is assembled, we will remove it (there is a step in the manual).
Manipulating with the printer
Manipulating with the printer
Manipulating with the printer
Never manipulate the printer by using the upper metal flanges. You can damage the LED lights hidden inside.
During the assembly manipulate the base using the extrusions.
Silicone sock
Silicone sock
A silicone sock is supplied with each Nextruder package.
The main function of a silicone sock is to keep the temperature in the heater block stable, which improves the printer's performance.
Also, it keeps your hotend clean from filament dirt and protects it in case the print detaches from the print surface.
You will be asked to install the sock later in this guide.
How to install the sock - check the article.
CAUTION: Lubricant Handling
CAUTION: Lubricant Handling
CAUTION: Lubricant Handling
CAUTION: Avoid direct skin contact with the lubricant used for the linear rails in this printer. If a contact occurs, wash your hands immediately. Especially before eating, drinking, or touching your face.
Lubricant accumulates in the printer's bearings, mainly in the linear rail channels.
View high resolution images
View high resolution images
When you browse the guide on help.prusa3d.com, you can view the original images in high resolution for clarity.
Just hover your cursor over the image and click the Magnifier button ("View original") in the top left corner.
Reward yourself
Reward yourself
Building the XL printer is definitely a challenge. So it is important to reward yourself after the difficult parts of the manual. That's why we included a bucket of Haribo bears in the package!
After completing each chapter or challenging section of the chapter, you will be prompted to replenish energy for the following steps.
Don't eat all the bears before you start or at once! Not following instructions will have serious consequences, we are currently assembling Prusa Haribo tactical squad for this matter.
Do not eat any of the Harribo Bears now! It is VERY IMPORTANT to distribute the amount correctly during assembly. We tried all sorts of combinations of quantities. Finally, we reached a successful result.
All right, eat one gummy bear. It will give you energy to start the assembly. ;) But just one!
Are you ready to get started on the assembly? Let's move on to chapter 2. Base & Side frame assembly.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us