EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

1. Introduction

Menu

1. Introduction

1. Introduction
Relevant for:
XL
Last updated 6 months ago
1. Introduction
 Difficulty
Easy
 Steps
10
 Available languages
CSPLDEESITFRJA

Step 1 General information

General information
General information
General information
The package with the printer is heavy! Always ask another person for help with handling.
⬢For the assembly, prepare a clean workbench with a space of at least 1 m x 1 m (40 in x 40 in).
⬢We're recommending a bright light above your workbench. Some parts of the printer are dark and inadequate light could make a very difficult procedure.

Step 2 What awaits you during the unpacking

What awaits you during the unpacking
What awaits you during the unpacking
What awaits you during the unpacking
Because of transportation, some of the fragile parts must be safely packed separately in the printer package. This manual will take you through the installation of these parts on the printer.
⬢These parts will be installed:
⬢LCD assembly
⬢Single tool extruder assembly
⬢Spool holder
⬢Wi-Fi antenna

Step 3 Tools in the package

Tools in the package
Tools in the package
Tools in the package
Tools in the package
⬢The package includes:
Some of the tools are intended primarily for regular printer maintenance. You won't need them for this manual. At the beginning of the assembly chapter is a list of the necessary tools.
⬢Torx key TX6, TX8, TX10
⬢Allen key 2.5 mm, 4.0 mm
⬢Wrench 13-16
⬢Universal wrench
⬢Philips PH2 screwdriver
⬢The printer's package contains a lubricant, which is intended for maintenance. No need to apply it during the assembly. There is a dedicated online manual Regular printer maintenance.

Step 4 Labels guide

Labels guide
Labels guide
⬢All the boxes and bags including parts for the build are labeled.
⬢The LCD Fasteners bag includes an extra spare of each part contained in the bag. The amount of spare parts is written on the label. This number is included in the total number of each type of part.

Step 5 Cheatsheet

Cheatsheet
Cheatsheet
Cheatsheet
⬢Your package contains a letter, on the back of which is a Cheatsheet with drawings of all the necessary fasteners.
⬢The fasteners drawings are 1:1 scale, so you can compare the size by placing the fastener on the paper to make sure you are using the correct type.
You can download it from our site help.prusa3d.com/cheatsheet. Print it at 100 %, don't rescale it, otherwise, it won't work.

Step 6 Silicone sock

Silicone sock
Silicone sock
⬢A silicone sock is supplied with each Nextruder package.
⬢The main function of a silicone sock is to keep the temperature in the heater block stable, which improves the printer's performance.
Also, it keeps your hotend clean from filament dirt and protects it in case the print detaches from the print surface.
⬢You will be asked to install the sock later in this guide.
How to install the sock - check the article.

Step 7 CAUTION: Lubricant Handling

CAUTION: Lubricant Handling
CAUTION: Lubricant Handling
CAUTION: Lubricant Handling
CAUTION: Avoid direct skin contact with the lubricant used for the linear rails in this printer. If a contact occurs, wash your hands immediately. Especially before eating, drinking, or touching your face.
⬢Lubricant accumulates in the printer's bearings, mainly in the linear rail channels.

Step 8 View high resolution images

View high resolution images
View high resolution images
When you browse the guide on help.prusa3d.com, you can view the original images in high resolution for clarity.
⬢Just hover your cursor over the image and click the Magnifier button ("View original") in the top left corner.

Step 10 Unpacking the printer

Unpacking the printer
Unpacking the printer
⬢

There are two versions of the printer package. The first units shipped have the Package A. The later batches were shipped in the Package B. 

The printer itself inside the box is the same. Only the packaging and the unboxing process differs.
⬢Package version A has adhesive labels on the box. If you have this version, continue to the chapter 2A. Printer Unboxing.
⬢Package version B. This version can be easily distinguished by having the image of a printer on the box. If you have this version, continue to the chapter 2B. Printer Unboxing.
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us