• Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語


This article is also available in following languages: 

Locked lock icon

Every setting on the Print, Filament and Printer tab has either a locked or unlocked lock icon next to it. The locked lock icon indicates that the value is the same as in the currently selected profile. As soon as the value is changed, the icon changes to unlocked lock and a back arrow appears, which lets you reset back to the value from the print profile. In addition to that, the label turns orange. This enables you to quickly spot settings that has been changed.

Colorblind mode

If you have one of the several different types of color blindness, you can customize some of the colors PrusaSlicer uses. Click on the red question mark in the Print, Material or Printer settings tab. Then you can click on one of the two colors at the bottom of the new window and set a different color.



Was this article helpful?


Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us