![Tools necessary for this chapter](https://cdn.help.prusa3d.com/wp-content/uploads/2023/09/4cafaaf4c9f07e6a977c20b95b539ffd_painted.jpeg)
![Tools necessary for this chapter](https://cdn.help.prusa3d.com/wp-content/uploads/2023/09/4e3e621fd20fa8c4e11325cf200c279e_painted.jpeg)
![Tools necessary for this chapter](https://cdn.help.prusa3d.com/wp-content/uploads/2023/09/274d50c327bec83ce145fc69643feda9_painted.jpeg)
⬢For the following steps, please prepare:
⬢2.5mm Allen key
⬢T10 Torx key
⬢Needle-nose pliers for cutting zip ties
⬢Piece of cloth or fabric (at least 15x15 cm) for covering the heatbed
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.