1. Rozpocznij montaż

Konserwacja drukarki

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L) [Tłumaczenie w toku]
  1. Rozpocznij montaż
  2. Wprowadzenie
  3. Tools necessary for this guide
  4. Printer preparation (part 1)
  5. Printer preparation (part 2)
  6. Removing the printer top cover
  7. Protecting the heatbed
  8. Accessing the hotend fan cable
  9. Disconnecting the hotend cables
  10. Removing the hotend assembly
  11. Disconnecting the hotend fan and thermistor cables
  12. Accessing the Hotend-cable-clip
  13. Removing the hotend fan
  14. Hotend fan parts preparation
  15. Attaching new hotend fan
  16. Attaching the Hotend-cable-clip
  17. Connecting the hotend fan and thermistor cables
  18. Inserting the hotend
  19. Checking the nozzle
  20. Connecting the hotend cables
  21. Guiding the hotend cables
  22. Attaching the Printhead-cover-left
  23. Attaching the printer top cover
  24. Turning the printer on
  25. Final check
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)