1. Iniziare il montaggio

Manutenzione della stampante

• Come installare l'adattatore Ugello Nextruder V6 (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• Come sostituire un gruppo hotend (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the advanced filtration (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L) [Traduzione in corso]
  1. Iniziare il montaggio
  2. Tools necessary for this guide
  3. Printer preparation (part 1)
  4. Printer preparation (part 2)
  5. Removing the printer top cover
  6. Proteggere il piano riscaldato
  7. Accessing the hotend cables
  8. Disconnecting the hotend cables
  9. Removing the hotend assembly
  10. Rimozione Calzino in Silicone
  11. Rimozione del Termistore
  12. Preparazione del termistore
  13. Installazione Termistore
  14. Inserire l'hotend
  15. Connecting the hotend cables
  16. Guiding the hotend cables
  17. Montaggio della copertura Printhead-cover-left
  18. Attaching the printer top cover
  19. Turning the printer on
  20. Controllo finale