1. Begin assembly

Printer maintenance

• How to install the Nextruder V6 Nozzle Adapter (CORE One)
• How to replace Heatbed (CORE One)
• How to replace Heatbed Thermistor (CORE One)
• Buddy3D Camera for CORE One Installation
• How to replace Z motors (CORE One)
• How to replace the Prusa Nozzle (CORE One)
• How to reverse the door orientation (CORE One)
• How to pack the Prusa CORE One for return - Original Packing material
• How to install Advanced Filtration (CORE One)
• How to pack the Prusa CORE One for return - Custom Packing material
  1. Begin assembly
  2. Introduction
  3. Prerequisites
  4. Tools necessary for this guide
  5. Necessary custom packing materials
  6. Printer preparation
  7. Removing the accessories
  8. How to remove the bezel
  9. Removing the bezel
  10. xLCD detaching
  11. xLCD disconnecting
  12. Securing the bezel
  13. Removing the spoolholder
  14. Packing the acessories
  15. Securing the CoreXY
  16. Bottom and corner padding
  17. Placing the printer in the box
  18. Accessories and top layer
  19. Sealing the box
• How to replace the xBuddy board (CORE One)
• How to replace Hotend fan (CORE One)
• How to replace Nextruder Filament Sensor (CORE One)
• How to replace Heatsink NTC Thermistor (CORE One)
• How to replace Hotend Heatsink (CORE One)
• How to replace X and Y Motors (CORE One)
• How to replace the print fan (CORE One)
• How to replace the Heatbed Power Cables (CORE One)
• How to replace the Chamber fan (CORE One)
• How to replace a Hotend Thermistor (CORE One)
• How to replace a Hotend Heater (CORE One)
• How to replace the Belt Tensioner Pulley (CORE One)
• How to replace the Belt Tensioner Left (CORE One)
• How to replace the Belt Tensioner Right (CORE One)
• How to replace Loveboard (CORE One)
• How to replace a hotend assembly (CORE One)
• How to replace the door sensor (CORE One)
• How to replace the side filament sensor (CORE One)