1. Tools necessary for this chapter

MMU3 Assembly (MK3S+, MK3.5, MK3.9/S, MK4/S, CORE)

• 1. Introduction
• 2. MMU2S Disassembly (UPG)
• 3. MMU2S Buffer Disassembly (UPG)
• 4. Idler Body Assembly
• 5. Selector Assembly
• 6. Pulley Body Assembly
• 7. Spool holder Assembly
• 8A. Cassette Buffer Assembly
• 8B. CORE One Buffer Assembly
• 9A. MK4/S, MK3.9/S Nextruder mod
• 9B. MK3S+ / MK3.5 Extruder mod (KIT)
• 9C. MK3S+ Extruder (UPG)
  1. Tools necessary for this chapter
  2. Introduction
  3. Old chimney disassembly (part 1)
  4. Old chimney disassembly (part 2)
  5. Old chimney disassembly (part 3)
  6. Hotend PTFE tube INFO
  7. Fan removal
  8. Splitting the extruder
  9. Partial extruder disassembly
  10. PTFE tube parts preparation
  11. Old PTFE tube removal
  12. New PTFE tube installation
  13. Extruder reassembly (Part 1)
  14. Extruder reassembly (Part 2)
  15. Extruder reassembly (Part 3)
  16. Extruder fan reassembly
  17. New chimney: parts preparation
  18. New chimney assembly (part1)
  19. New chimney assembly (part 2)
  20. New chimney assembly (part 3)
  21. IR Filament sensor: parts preparation
  22. IR Filament sensor assembly
  23. Extruder-idler-mmu2s parts preparation.
  24. Bondtech lubrication
  25. Extruder-idler-mmu2s installation.
  26. Opening the electronics box
• 9D. CORE One Nextruder mod
• 10A. MK4/S, MK3.9/S Setup and Calibration
• 10B. MK3S+ Setup and Calibration
• 10C. MK3.5 Setup and Calibration
• 10D. CORE One Setup and Calibration
• 11. First Flight