1. Tools necessary for this chapter

Original Prusa i3 MK3S kit assembly (v3.15)

• 1. Introduction
• 2. Y-axis assembly
• 3. X-axis assembly
• 4. Z-axis assembly
• 5. E-axis assembly
• 6. LCD assembly
• 7. Heatbed & PSU assembly (Black PSU)
  1. Tools necessary for this chapter
  2. Heatbed cable assembly (part 1)
  3. Heatbed cable assembly (part 2)
  4. Heatbed cable assembly (part 3)
  5. New heatbed cable cover design
  6. Preparing the heatbed (new design)
  7. Preparing the heatbed-cable-cover
  8. Mounting the heatbed-cable-cover
  9. Mounting the heatbed-cable-cover
  10. Proper cable management
  11. Wrapping the heatbed cables
  12. Securing the sleeve in place
  13. Finalizing the wrap
  14. Preparing the heatbed (old design)
  15. Preparing the heatbed-cable-cover
  16. Mounting the heatbed-cable-cover
  17. Proper cable management
  18. Wrapping the heatbed cables
  19. Securing the sleeve in place
  20. Finalizing the wrap
  21. Preparing the heatbed screws and spacers
  22. Mounting the heatbed (part 1)
  23. Mounting the heatbed (part 2)
  24. Mounting the heatbed (part 3)
  25. Mounting the heatbed (part 4)
  26. Checking the hotend cables
  27. Preparing the PSU parts
  28. Assembling the PSU
  29. Assembling the PSU
  30. Connecting the power cables (CRITICAL)
  31. Connecting the power cables
  32. Connecting the power cables
  33. Power panic and PSU cover
  34. Haribo time!
  35. Heatbed and PSU are done!
• 7. Heatbed & PSU assembly (Silver PSU)
• 8. Electronics assembly
• 9. Preflight check
• Manual changelog