1. Tools necessary for this chapter

Original Prusa i3 MK3S+ kit assembly (v3.26)

• 1. Introduction
• 2A. Y-axis assembly
  1. Tools necessary for this chapter
  2. YZ frame - preparing the components
  3. YZ frame - mounting the longer extrusions
  4. YZ frame - mounting the shorter extrusions
  5. YZ frame - final check
  6. Y-axis: front and rear plate preparation
  7. Y-axis: front plate assembly
  8. Y-axis: preparation for the PSU
  9. Y-axis: rear plate assembly
  10. Y-axis: geometry check
  11. Mounting antivibration feet (optional)
  12. Preparing Y-belt-idler (part 1)
  13. Preparing Y-belt-idler (part 2)
  14. Preparing Y-belt-idler (part 3)
  15. Mounting the Y-belt-idler
  16. Y-axis: motor and motor holder
  17. Preparing Y-motor-holder
  18. Mounting Y-motor-holder
  19. Y-axis: Y-carriage
  20. Installing the bearing clip
  21. Inserting the bearings
  22. Securing the bearings
  23. Inserting smooth rods into Y-carriage
  24. Y-axis: smooth rods holders
  25. Preparing Y-rod-holder
  26. Mounting the Y-rod-holder parts
  27. Installing the Y-carriage
  28. Aligning the smooth rods
  29. Assembling the Y-motor pulley
  30. Y-axis: Assembling the belt
  31. Y-axis: Assembling the belt
  32. Y-axis: Assembling the belt
  33. Y-axis: Assembling the belt
  34. Y-axis: Assembling the belt
  35. Y-axis: Assembling the belt
  36. Aligning the Y-axis belt
  37. Tensioning the Y-axis belt
  38. Testing the Y-axis belt
  39. Haribo time!
  40. Y-axis is finished!
• 2B. Y-axis assembly
• 3. X-axis assembly
• 4. Z-axis assembly
• 5. E-axis assembly
• 6. LCD assembly
• 7. Heatbed & PSU assembly
• 8. Electronics assembly
• 9. Preflight check
• Manual changelog MK3S+ kit