1. Outils nécessaires pour ce chapitre

Kit de conversion INDX de Bondtech pour la Prusa CORE One/+ (Founders Edition)

• 1. Introduction & preparation
• 2. Printer disassembly
• 3. Z-axis upgrade [Traduction en cours]
  1. Outils nécessaires pour ce chapitre
  2. Optional: Installing the Buddy3D Camera USB-C cable
  3. Retrait du cache-câble du plateau chauffant
  4. Releasing the heatbed
  5. Removing the heatbed
  6. Removing the bed spacer
  7. Entretoises du plateau chauffant : préparation des pièces
  8. Assembling the INDX-bed-spacer-rear
  9. Mounting the INDX-bed-spacer-rear
  10. Inserting the spacer - left
  11. Securing the bed spacer - left
  12. Inserting the spacer - right
  13. Securing the bed spacer - right
  14. Offset sensor: parts preparation
  15. Mounting the INDX OffsetSensor
  16. Connecting the offset sensor cable
  17. Securing the offset sensor assembly
  18. Guiding the offset sensor cable
  19. Securing the offset sensor cable
  20. Removing the Bed-cable-cover-bottom
  21. Heatbed cable covers: parts preparation
  22. Heatbed cable covers: parts preparation II
  23. Assembling the Bed-cable-cover-bottom
  24. Inserting the heatbed
  25. Securing the heatbed
  26. Gainage des câbles du plateau chauffant
  27. Recouvrement des câbles du plateau chauffant
  28. Guiding the heatbed cable bundle I.
  29. Guiding the heatbed cable bundle II.
  30. Fixation de la gaine textile
  31. Removing the Bed-stop-rear
  32. INDX-C1-Bed-stop-rear: parts preparation
  33. Assembling the Bed-stop-rear
  34. Installing the new Bed-stop-rear
  35. Securing the Bed-stop-rear
  36. Connecting the RGB LED + offset sensor cables
  37. Connexion des câbles du plateau chauffant
  38. Haribo time
  39. Done
• 4. INDX Toolhead & Side filament sensors
• 5. Spool holders & Tool dock assembly
• 6. Preflight check