1. Comenzar el montaje

Mantenimiento de la impresora

• How to install the Nextruder V6 nozzle adapter (CORE One L)
• How to replace the Prusa Nozzle (CORE One L)
• How to replace a hotend assembly (CORE One L)
• How to replace the hotend fan (CORE One L)
• How to replace the side filament sensor (CORE One L)
• How to install the Advanced Filtration (CORE One L)
• How to replace the Buddy3D camera cable (CORE One L)
• How to replace a Hotend Heater (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace Nextruder Filament Sensor (CORE One L)
• How to replace the print fan (CORE One L)
• How to replace the Accelerometer (CORE One L)
• How to replace Hotend Heatsink (CORE One L)
• How to reverse the door orientation (CORE One L)
• How to replace Loveboard (CORE One L)
• How to replace a Hotend Thermistor (CORE One L)
• How to replace the White LED strip (CORE One L)
• Cómo embalar la CORE One L para devolución
• How to replace the heatbed fans (CORE One L) [Traducción en desarrollo]
  1. Comenzar el montaje
  2. Introduction
  3. Tools necessary for this guide
  4. Preparing the printer
  5. Removing the zipties
  6. Detaching the rear fan
  7. Detaching the front fan
  8. Removing the LED panel
  9. Disconnecting the fan
  10. Parts Preparation: Heatbed fan
  11. Adding the bed fan mount
  12. Connecting the new fan
  13. Mounting the LED panel
  14. Attaching the front fan
  15. Attaching the rear fan
  16. Securing the fan cables
  17. Heatbed fans test
  18. Well done
• How to replace the AC box (CORE One L)