English
Login
3D printers
Materials
Parts & Accessories
Software
3D Models
Applications
Community
Help
Academy
Blog
Company
Support
Original Prusa i3 MK3
Original Prusa i3 MK3 kit assembly
5. E-axis assembly (textile sleeve) | Textile sleeve vs spiral wrap
1. Textile sleeve vs spiral wrap
Step 1 of 50 (Chapter 7 of 14)
Fullscreen mode
Contents
Comments
Before you proceed further ensure again, you are in the correct chapter:
⬢
The longest and biggest sleeve is a textile sleeve.
If so, you can proceed according to this chapter.
⬢
If the longest and biggest sleeve is a spiral wrap
, please use this chapter instead:
5. E-axis assembly (spiral wrap)
Loading...
Next
Contents
Original Prusa i3 MK3 kit assembly
1. Introduction
Introduction
2. Y-axis assembly
3. X-axis assembly
4. Z-axis assembly
5. E-axis assembly (spiral wrap)
5. E-axis assembly (textile sleeve)
Textile sleeve vs spiral wrap
Tools necessary for this chapter
Idler assembly (part 1)
Idler assembly (part 2)
Idler assembly (part 3)
Assembling filament sensor (part 1)
Assembling filament sensor (part 2)
Assembling filament sensor (part 3)
Assembling filament sensor (part 4)
Extruder assembly - idler (part 1)
Extruder assembly - idler (part 2)
Assembling the Extruder motor pulley (part 1)
Assembling the Extruder motor pulley (part 2)
Mounting the Extruder motor
Adjusting and tightening the pulley
Securing the Extruder idler
Preparing hotend and extruder-cover
E3D V6 hotend - different versions
Inserting the E3D hotend
Preparing the extruder-cover
Mounting point for the Extruder body
Mounting the extruder-cover
Preparing cooling fans
Mounting the left hotend fan
Mounting the front print fan - parts B7/R3
Mounting the front print fan - parts B7/R3
Mounting the front print fan
Preparing the P.I.N.D.A. probe
Mounting the P.I.N.D.A. probe
Extruder cables preparation
Mounting the Extruder
Cable for the filament sensor
Connecting the Filament sensor
Preparing the NYLON filament
Inserting the NYLON filament
Preparing the X-carriage-back (part 1)
Preparing the X-carriage-back (part 2)
Preparing the X-carriage-back (part 3)
Preparing the X-carriage-back (part 4)
Assembling the X-carriage-back
Adjusting the filament sensor cable
Mounting the X-carriage-back
Tightening the textile sleeve (part 1)
Tightening the textile sleeve (part 2)
Tightening the textile sleeve (part 3)
Mounting the Filament-sensor-cover (part 1)
Mounting the Filament-sensor-cover (part 2)
Mounting the Filament-sensor-cover (part 3)
Assembling the idler-plug
E-axis is finished!
6. LCD assembly
7. Heatbed & PSU assembly (spiral wrap)
7. Heatbed & PSU assembly (textile sleeve)
8. Electronics assembly (B3/R2 design)
8. Electronics assembly (B7/R3 design)
9. Preflight check
Manual changelog
Comments
Log in
to post a comment
No comments