What happened?
This warning indicates that the printer is experiencing slow G-code data transfer, either from a USB drive or over the network. The message shown is: G-Code transfer running too slow. Check your network for issues or use different USB drive. Press Continue to resume printing.
This can occur if the USB drive is too slow or corrupted, or if the network connection is unstable or under heavy load.
Thanks to G-Code streaming, the printer can start a print, even if the entire file hasn't yet been fully transferred to the USB drive.
Error name: Not downloaded
Error code: #31824 (CORE One) #17824 (XL) #26824 (MK4S) #13824 (MK4) #27824 (MK3.9S) #21824 (MK3.9) #28824 (MK3.5S) #23824 (MK3.5) #12824 (MINI)
How to fix it?
Check for:
- Stable Wi-Fi or Ethernet connection to the printer
- Low network congestion or interference
- Avoid using slow or heavily fragmented USB drives.
- After checking or replacing the source, press Continue on the printer to resume printing.
If the issue persists, transfer the G-code to the USB drive before printing, or use a different USB drive to rule out hardware or connectivity problems.
Byl tento článek užitečný?
Tato akce je dostupná pouze registrovaným uživatelům. Prosím přihlaste se.