Printer has not been calibrated yet
The error message Printer has not been calibrated yet occurs after the assembly of your printer or after factory resetting all data. It will remain on the main LCD screen until you successfully calibrate the printer.
- Make sure to successfully and fully finish the calibration. If the calibration is interrupted with an error message or by the user, no calibration data will be saved.
- You can perform the whole calibration process through our wizard. Simply go to the LCD Menu - Calibration - Wizard, or you can go step by step doing the Selftest, XYZ calibration, and First layer calibration individually.
- Once the calibration is finished, this error message will disappear and you will be able to safely use your printer.
Do not hesitate to contact us at firstname.lastname@example.org if you would have any further questions.