The printer displaying the message: Speaker test failed, please check the connection and repeat the action.
Error name: Speaker test failed
Error code: #10310
The speaker test will play the user a sound that is confirmed by user-input. If the sound is played by the test, and you select you did not hear it, it will give this error.
Make sure the connector is well seated using the guide below and polarity is correct (Red on the Right, by the +).
Also inspect the speaker, found at the back of the Touch Screen, whether its wires are secure, and no solder pads have come loose.
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to firstname.lastname@example.org or through the button below.