EN
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語
Login

Polypropylene (PP)

This article is also available in following languages: 
CSPLDEJAESITFR

Basic info

Polypropylene (PP) is a light material commonly used for storage and packing in the food processing industry. It’s usable for printing partially flexible parts. Due to its high price and difficult printing, it’s not recommended for beginners.
 
Recommended nozzle temperature: 220 °C
 
Recommended bed temperature: 100 °C
 
Heatbed: Smooth PEI sheet with PP tape will provide the best adhesion.

Description

In 3D printing, PP (Polypropylene) is mostly used for making hinges, straps, belts, and other bendable parts. The main disadvantage of this material is its price and very poor print surface adhesion. PP has a pretty good resistance against acids, bases/lyes, and organic solvents. PP is lightweight and food-safe (even though regular 3D printing food safety limitations apply). It is translucent in thin layers.

To compare supported material properties, see our material table.

Pros

Cons

✔ Lightweight material

✖ Bad surface adhesion

✔ High chemical resistance

✖ High warping, especially with large models

✔ High tenacity

✖ High price

Best use

PP is mostly used for making food safe and bendable objects.

Tips for successful printing

Surface preparation

Manufacturers usually recommend the following surface preparations: PP foil (PP tape), glass/mirror with Magigoo PP. We recommend using a smooth PEI sheet with PP tape and setting a higher temperature for better layer adhesion (but relatively lower for the first layer). Printing PP on the powder-coated satin sheet is also possible but be aware that it might adhere less than on the smooth PEI sheet with PP tape.

Temperature

Temperatures may vary depending on the particular filament brand, but standard values are somewhere between 225-245 °C for the nozzle and 80-105 °C for the heated bed. PP is highly prone to warping, consider printing in an enclosure.

You can purchase the Original Prusa Enclosure in our e-shop. 

It is also possible to make your own enclosure.

 

Sample prints

 
Bendable objects 
Was this article helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us