1. Tools necessary for this chapter

Original Prusa MMU3の組み立て（MMU2Sからのアップグレードを含む）

• 1. はじめに
• 2. MMU2Sの分解 (アップグレードキット)
• 3. MMU2Sバッファーの分解 (アップグレードキット)
• 4.アイドラーボディの組み立て
• 5.セレクターの組み立て
• ６．プーリーボディの組み立て
• ７．スプールホルダーの組み立て
• 8A. カセットバッファーの組み立て
• 8B．CORE One バッファのアッセンブリ
• 9A. MK4/S, MK3.9/S Nextruder mod
• 9B. MK3S+ / MK3.5 Extruder mod (KIT)
• 9C. MK3S+ Extruder (UPG)
• 9D. CORE One Nextruder mod
• 10A. MK4/S, MK3.9/S Setup and Calibration
• 10B. MK3S+ Setup and Calibration [進行中の翻訳]
  1. Tools necessary for this chapter
  2. Frame holders parts preparation
  3. Frame holders assembly
  4. Label plate installation
  5. Attaching the MMU unit (part 1)
  6. Attaching the MMU unit (part 2)
  7. Attaching the cable bundle
  8. Guiding the MMU cable
  9. MK3S+ Trimming the electronics box door
  10. MK3S+ Trimmed electronics door installation
  11. MK3S+ Electronics wiring diagram
  12. MK3S+ Connecting the data and FS cables
  13. MK3S+ Connecting the power cables
  14. MK3S+ Closing the electronics box
  15. Software Download
  16. PrusaSlicer setup for MMU3
  17. Firmware files download
  18. Selecting a Printer firmware file
  19. MK3S+ Firmware flashing (part 1)
  20. MK3S+ Firmware flashing (part 2)
  21. MK3S+ Turning the MMU on and reset
  22. MMU3 Firmware flashing (part 1)
  23. MMU3 Firmware flashing (part 2)
  24. IR filament sensor calibration (Part 1)
  25. IR filament sensor calibration (Part 2)
  26. IR filament sensor calibration (Part 3)
  27. SuperFINDA sensor calibration info
  28. SuperFINDA calibration
  29. Error code details (Part 1)
  30. Error code details (Part 2)
  31. MMU-to-Extruder PTFE tube parts preparation
  32. MMU-to-Extruder PTFE tube
  33. Spoolholders setup
  34. Connecting Buffer PTFE tubes
• 10C. MK3.5 Setup and Calibration
• 10D. CORE One Setup and Calibration
• 11. ファーストフライト