English
1. Top Cover
Step 1 of 50 (Chapter 17 of 18)
Contents
Comments
⬢Before installing the MMU unit, remove the printer's top cover if it hasn't been removed already.
Contents
MMU3 Assembly (MK3S+, MK3.5, MK3.9/S, MK4/S, CORE)
- 1. Introduction
- 2. MMU2S Disassembly (UPG)
- 3. MMU2S Buffer Disassembly (UPG)
- 4. Idler Body Assembly
- 5. Selector Assembly
- 6. Pulley Body Assembly
- 7. Spool holder Assembly
- 8A. Cassette Buffer Assembly
- 8B. CORE One Buffer Assembly
- 9A. MK4/S, MK3.9/S Nextruder mod
- 9B. MK3S+ / MK3.5 Extruder mod (KIT)
- 9C. MK3S+ Extruder (UPG)
- 9D. CORE One Nextruder mod
- 10A. MK4/S, MK3.9/S Setup and Calibration
- 10B. MK3S+ Setup and Calibration
- 10C. MK3.5 Setup and Calibration
- 10D. CORE One Setup and Calibration
- Top Cover
- Core One MMU3 Types
- (LITE) MMU Holder Preparation
- (LITE) M3nS Installation
- (LITE) MMU Holder Installation 1
- (LITE) MMU Holder Installation 2
- (LITE) MMU Placement 1
- (LITE) MMU Placement 2
- (ENC) Top Cover Preparation
- (ENC) Top Cover Assembly 1
- (ENC) Top Cover Assembly 2
- (ENC) Top Cover Assembly 3
- (ENC) MMU Holder Preparation
- (ENC) M3nS Installation
- (ENC) MMU Holders Installation
- (ENC) Metal Holder Preparation
- (ENC) Metal Holder Assembly
- (ENC) Unit Assembly
- (ENC) MMU Placement Preparation
- (ENC) MMU Assembly Placement
- Back Cover Removal 1
- Back Cover Removal 2
- MMU Cable Connection
- Back Cover Installation 1
- Back Cover Installation 2
- Software Download
- PrusaSlicer setup for MMU3
- Firmware files download
- Firmware Upgrade: Printer
- Turning the MMU on
- MMU3 Firmware flashing (part 1)
- MMU3 Firmware flashing (part 2)
- Gears calibration
- Gearbox Alignment
- MMU Filament sensor calibration
- Footer Status Bar
- SuperFINDA sensor calibration info
- SuperFINDA calibration
- Side Filament Sensor Check
- Error code details (Part 1)
- Error code details (Part 2)
- MMU-to-Extruder PTFE tube parts preparation
- MMU-to-Extruder PTFE tube 1
- Fitting Cover. (ENC)
- MMU-to-Extruder PTFE tube 2
- PTFE Length Calibration
- (ENC) Top Cover Installation
- Buffer Attachment
- PTFE tubes connection
- Spoolholders setup
- 11. First Flight
On my old MK4S (now converted to Core One) printer I swapped between using MMU3 for multi-colour printing and single-colour printing using a seperate single spool by just changing the the PTFE on the nextruder. It worked great and without problems. Can I do the same on Core One? (I am installing ther MMU3 Light Version, just attaching it to the back of the top frame).
Also, do I have to go through all the calibration business when the MMU3 has already worked with MK4S? Of couse, I have to flash the latest MMU3 firmware.